Guides & Resources

Guides & Resources

โ€ข

โ€ข

โ€ข

โ€ข

9

9

Read

Read

How to Automate Collections in Sage 300 CRE for Contractors

Sage 300 CRE holds your jobs, contracts and receivables. Here is how a 3 to 5 person construction AR team automates the follow-up from a daily export, handles pay app and change order disputes, and rolls it out safely.

Pratheek Adi

Pratheek Adi

Co-Founder & CTO

SAGE 300 CRE
CONSTRUCTION
AR TEAMS
SAGE 300 CRE
CONSTRUCTION
AR TEAMS
SAGE 300 CRE
CONSTRUCTION
AR TEAMS
Yellow tower cranes beside a high-rise building under construction

Table of contents

Share

Contractors running Sage 300 Construction and Real Estate keep jobs, contracts, billing, receivables and job cost in one system. Progress billings go out every month, change orders get billed as they are approved, and retainage builds up on every job until closeout. What Sage 300 CRE does not do on its own is call the general contractor's AP team about the pay application that is now 50 days past due. That still lands on your AR team.

The work is not slowing down. The U.S. Census Bureau put construction spending at a seasonally adjusted annual rate of $2,203.1 billion in August 2026. Every one of those dollars moves through a pay application, an approval chain and a payment run before it reaches a contractor's bank account.

This guide is for the controller or AR manager running a collections team of three or more people on Sage 300 CRE. It covers what Sage 300 CRE already gives you, where the follow-up time actually goes at a contractor, and how to automate overdue invoice follow-up from a daily export without an integration project.

Can You Automate Collections in Sage 300 CRE?

Yes. You can automate overdue invoice follow-up for Sage 300 CRE by sending a daily open invoice export to an AI collections agent, which then calls, texts and emails customers on your schedule and hands pay application disputes, change order questions and retainage releases back to your team. Sage 300 CRE stays your system of record for jobs, contracts and invoices. The agent works from the same AR aging data your staff already pull, so there is no API project to start.

Want to see it on your own numbers? Get started and we will set up a pilot on your Sage 300 CRE aging report. Prefer to talk it through first? Book a 30-minute call.

What Does Sage 300 CRE Already Give Your AR Team?

Sage 300 CRE gives a contractor's AR team solid tools for tracking what is owed. Sage's own documentation describes:

  • Separate Accounts Receivable, Billing, Contracts, Job Cost and Cash Management applications, listed in the version 24 release notes, so invoices tie back to a job and a contract.

  • Retainage billed either from Billing, on contract-based or cost-based invoices, or directly in Accounts Receivable, as Sage's knowledgebase article on billing retainage explains.

  • Dashboard reports, including an AR Aging Customer Detail report that shows each customer's open invoices by aging period, and a sample Project Summary dashboard with open AR by job, described on Sage's reports and dashboards help page.

That is a good base for knowing what is open and on which job. The gap is the follow-up itself: someone still has to call the general contractor or owner's rep, find out where the pay app sits, write down the payment date and call back when the date slips.

Where Does the Collections Time Go at a Contractor?

At a contractor, collections time goes to approval chains and paperwork, not to customers who refuse to pay. A pay application can stall at the architect, at the GC's project manager, at the owner's lender or in AP, and each stop needs a different question. Most of your past-due balance is waiting on a step, not disputed.

The usual backlog looks like this:

  • Pay applications sent back for a missing document, such as a lien waiver form, a certified payroll report or an updated schedule of values, that nobody followed up on.

  • Change orders that were approved in the field but billed before the paperwork caught up, so AP will not match them. Our guide to change order billing covers how to prevent that at the source.

  • Retainage on finished jobs that sits for months because closeout items are open and nobody owns the list.

  • Small service and time-and-material invoices that never get a phone call, because a $600 service ticket is never the best use of a collector's hour.

  • Payments that arrive without remittance and sit as unapplied cash, which makes the aging look worse than it is.

A monthly statement helps with the first reminder. It does not answer back when the GC replies with a question, and it does not pick up the phone.

What Do You Need From Sage 300 CRE to Start?

You need three things, all of which your team can already pull:

  • An open invoice or AR aging export: customer, job number, contract, invoice number, invoice date, due date, open balance, retainage held and any PO or subcontract number.

  • Customer contacts: the AP email and phone on each account, plus the GC project manager or owner's rep contact where you have one.

  • Optionally, copies of pay applications and change orders, if you want them attached to reminders.

A scheduled daily export is enough. When someone updates a contact in Sage 300 CRE, the next day's export carries the change, so nobody maintains contacts in two places. If you run a smaller Sage product, our guide to exporting an AR aging report from Sage 100 Contractor shows the fields to include.

Sage 300 CRE data

What the AI agent does with it

Who owns exceptions

Open invoices and due dates

Decides who gets a reminder today and on which channel

Collector reviews new accounts added to the slice

Job and contract number

Names the project in every reminder so AP can find it

Billing fixes invoices posted to the wrong job

PO or subcontract number

Quotes it so AP can match the invoice to the commitment

Project manager supplies missing numbers

Invoice type (progress, change order, T&M, retainage)

Uses the right message and cadence for each type

AR manager sets the cadence per type

Retainage held

Keeps retainage out of past-due reminders until it is billed

Project manager owns the closeout list

AP email and phone

Sends email and text, places calls

Collector fixes bounced or wrong contacts

Partial payments

Asks about the short-paid amount and records the reason

Collector researches and resolves the balance

How Do You Roll It Out Without an Integration Project?

Start with one slice of the aging report, prove it, then widen the slice. A rollout that keeps your team in control looks like this:

  1. Pick the first slice. Small past-due service and T&M invoices are a good start, for example invoices under $2,500, because they are the ones your team never reaches.

  2. Start with a set group of customers. Begin with around 100 accounts, read the replies for a few days, then add more.

  3. Let the agent follow up by email, text and phone on your schedule, logging every touch against the invoice.

  4. Route anything that needs a person to a person. Pay application rejections, change order disputes, retainage releases and promises to pay go to your team with the full history attached.

  5. Add progress billings once the first slice runs cleanly, then your larger GC and owner accounts.

What to measure in the first 30 days

  • Share of the slice that paid or gave a payment date without a collector touching it.

  • Number of accounts handed back to your team, and the reasons: missing documents, change orders, wrong contact, retainage questions.

  • Movement in the 31 to 60 day bucket for the customers in the slice versus the rest of the ledger.

  • Hours your collectors got back each week, and what they spent them on.

If the handbacks are mostly wrong contacts, fix the contact data before widening the slice. Our guide to keeping billing contacts current covers the routine. If they are mostly missing documents, that is a billing checklist worth fixing before the pay app goes out. See our guide to invoice backup documentation.

What stays with your collectors

  • Disputed pay applications and change orders that need the schedule of values, field tickets or approvals. See how to resolve invoice disputes for the workflow.

  • Retainage releases, which depend on closeout items your project managers own. Our guide to construction DSO and retainage covers how to keep retainage from aging out.

  • Key GC and owner relationships where a call from the project executive matters more than another reminder.

What Should Reminders to Construction Customers Say?

Construction reminders work when they give the GC or owner's AP team everything needed to find, match and approve the invoice in one message. A reminder that only states the balance gets set aside until someone finds the job.

Progress billings

Lead with the job name, the pay application number, the billing period and the PO or subcontract number. Ask one question: where is the pay app in your approval process, and when is it scheduled for payment? Record the answer as a promise to pay and follow up the day after the date passes.

Change orders

Name the change order number, the date it was approved and who approved it. If the customer says it is not approved on their side, the reply goes straight to your project manager instead of getting a second reminder.

Service and T&M invoices

Keep the message short and specific: what the work was, which site it was at and a way to pay. Many of these customers simply missed the invoice, and a polite reminder clears it without a phone call. If a customer requires invoices through a portal, our guide to supplier portal invoicing covers what to check first.

Common Questions From Sage 300 CRE AR Teams

What about the statements we already send?

Keep them. A statement is a summary. The agent picks up after it, answers replies, makes calls and records payment dates, so the two work in sequence rather than duplicating each other.

What about accounts our team is already working?

Mark them for removal and outreach stops on them, so a customer never hears from two people about the same invoice.

How Abivo Helps Contractors on Sage 300 CRE

Abivo's AI collections agent, Kate, works from your daily Sage 300 CRE export. Kate follows up on overdue progress, change order and service invoices by phone, text and email, quotes the job, pay application and PO numbers that AP needs, logs every touch, and hands pay app rejections, change order disputes, retainage questions and promises to pay to your team with the conversation attached. Your collectors spend their day on disputes and key relationships instead of chasing small invoices.

For a wider view, see our guide to collections software for construction contractors and our roundup of the best collections software for commercial contractors. On a different system? Here is how to automate collections in ServiceTitan, in Point of Rental and in Epicor Prophet 21, and the systems we work with are on our integrations page. For results from a field services business, read how OFS Group unlocked trapped AR with AI.

Practical Takeaways for Sage 300 CRE AR Teams

  • Export once a day. An open invoice export with job numbers, pay application numbers, PO numbers and AP contacts is all an AI agent needs to start.

  • Put the job, pay app and PO in every reminder. An unmatched construction invoice is stuck, not late.

  • Ask where the pay app sits in the approval chain, then record the payment date as a promise.

  • Start with small service and T&M invoices and about 100 customers, then add progress billings.

  • Keep disputed pay apps, change orders, retainage releases and key relationships with your collectors and project managers.

  • Clear unapplied cash before you start, so customers are not chased for invoices they already paid.

FAQ

Does Abivo integrate directly with Sage 300 CRE?

Abivo works from a scheduled export of your open invoices and customer contacts out of Sage 300 CRE, so no direct integration or IT project is needed to start.

Which Sage 300 CRE invoices should an AI agent handle first?

Start with small past-due service and T&M invoices, such as those under $2,500, for a set group of about 100 customers. Add progress billings once the first slice runs cleanly.

Will the agent chase retainage before it is due?

No. Retainage held stays out of past-due reminders until your team bills it. Retainage releases and closeout questions go to your collectors and project managers.

What happens when a GC rejects a pay application?

The agent records what the customer said and passes it to your collector with the full conversation attached. Your team fixes the pay app or supplies the missing document and resubmits.

Will customers know the reminder came from us?

Yes. Reminders go out under your company name and use the contacts on the customer's account.

Running Sage 300 CRE with three or more people on collections? Get started and we will set up a pilot on your own aging report. Prefer to talk it through first? Book a 30-minute call.

Looking for more? Dive into our other articles, updates, and strategies